Product

Tìm kiếm sản phẩm

Tên sản phẩm

Từ giá

Đến giá

TÌM KIẾM SẢN PHẨM

Outstanding product

The Spe-ed™ SFE-2 lab-scale supercritical fluid extraction

Fractionated extraction of saponins from Vietnam ginseng using supercritical CO2, ethanol

Supercritical fluid extraction of cordycepin and adenosine from Cordyceps kyushuensis and purification by high-speed counter-current chromatography

Micro Algae | Uses for Supercritical Fluids

Aerogels | Uses for Supercritical Fluids

Applied Separations

Online support

Tel: 0908866933 - secovina@vnn.vn

Supercritical Fluid Systems

Multitube Vortexer

Supercritical Extraction System

DIN Abrasion Tester

Lab Scale Freeze Dryer

Facebook

Thống kê truy cập

Đang online 0
Hôm nay 0
Hôm qua 0
Trong tuần 0
Trong tháng 0
Tổng cộng 0

AUTOMATIC GRAVITOMETER

(1 đánh giá)

Mã sản phẩm : MS-2152

Xuất xứ : Ueshima

Bảo hành : 12 months

The MS-2152 Automatic Gravitometer measures density of rubber and plastics automatically. Consisting of a control box and an electronic balance with a bat lifting mechanism, it realizes a compact system. This equipment conforms to submerged replacement process (immersion method) described in JIS K7112 “Plastics – Methods of determining the density and relative density of non-cellular plastics”, JIS K0061 “Test methods for density and relative density of chemic

Giá sản phẩm :

Detail

MODEL	MS-2152
Method	Submerged replacement method
Measurement Range	0.3～20 Mg/m3
Configuration	Detector section	Electronic balance, bat, up & down movement, temp. sensor
	M’ment section	Operation switches, LCD, power switch, printer connector
Detector Section	Electronic balance	MS204S of Mettler Toledo, 210g max., 0.1mg of display resolution
	Bat	Made of pyrex glass, inner dimensions: 94 x 94 x 147mm
	Temp. sensor	Pt temperature sensor
	Up/down movement	Belt driven, installed in the electronic balance
Measurement & Control Section	Calculation	Water density temperature compensation, sample volume calculation, sample density calculation
	Control	Measurement process control, bat movement control
	Display	LDC, 20 characters by 4 lines
	Displayed items	Liquid temperature (°C), sample weight in the air, weight in the liquid, density, volume
Outer Dimensions	W250 x D430 x H462(mm)
Power Supply	Balance: AC100V 1.5VA, M’ment control box: AC100V 20VA, Printer: AC100V 5VA
Option	Data acquisition software: Transfers measurement results to Excel sheet
	Thermal printer (printout of result data)
	Liquid density measurement software and tools (glass weight, etc.)

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

Mooney Viscometer

Ueshima Seisakusho VR-1130 Mooney Viscometer ●Measurement of Mooney viscosity for unvulcanized rubber ●Measurement of scorch time for unvulcanized rubber Applied Standard JIS K 6300-1, ISO289, ASTM D 1646

Rotorless rheometer (Flat Die Rheometer)

JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter） FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd.

GEHMAN’S TORSION TESTER

Rubber loses resiliency as temperature goes down. The frozen rubber can't keep its essential characteristics under the temperature below Glass Transition Point. In fact, the rubber applications under severe environments such as vehicle tire in frozen area and aircraft components in the stratosphere are seriously affected. Our Gehman's torsion tester TM-2535 is the most popular testing machine for this purpose and is adopted by JIS K6261(Equivalent to ISO 1432, ASTM D1053).

GAS PERMEABILITY TESTER

GAS PERMEABILITY TESTER for test GAS PERMEABILITY of Rubber MS 4510 - Ueshima - Japan

Rubber Two Roll Mill

Geer's Aging Oven

Rubber and plastic products will be deteriorated gradually by oxidation or influence of heat and sunlight in a long time of use depending on the environment. Moreover, it may not only result in degradation of the necessary performance which was secured in the beginning but also result in a big accident in some cases. Applicable Standard JIS K 6257, ISO 188, JIS K 7212 B Type/JIS K 7212, ISO 4577

DIN Abrasion Tester

The DIN Abrasion Tester is of the type that rotates a drum with grinding cloth wound around the surface at a specified speed, presses the sample against the grinding cloth. Applicable Standard: JIS K 6254-2/ISO4649/ISO23794 Test Piece Size: 16.2±0.2mm dia, 6mm or thicker Drum Size: 150±0.2mm dia., 460mm wide Drum Speed: 40±1rpm

Wallace Rapid Plastimeter

The MonTech Plastimeter( wallace rapid plastimeter) measures the plasticity or viscosity of unvulcanised rubbers. The test is simple, clean and quick. The instrument is used in conjunction with the MonTech Aging chamber for plasticity testing to determine the Plasticity Retention Index (PRI) of raw natural rubbers.

The Spe-ed™ SFE-2 lab-scale supercritical fluid extraction

Flat Die Rheometer (FDR)

Mooney Viscometer

Multi-Tube Vortexer

DIN Abrasion Tester

Pilot/Laboratory Freeze Dryer

Supercritical CO2

Fractionated extraction of saponins from Vietnam ginseng using supercritical CO2, ethanol

Supercritical fluid extraction of cordycepin and adenosine from Cordyceps kyushuensis and purification by high-speed counter-current chromatography

Micro Algae | Uses for Supercritical Fluids

Aerogels | Uses for Supercritical Fluids

AUTOMATIC GRAVITOMETER

Mooney Viscometer

Rotorless rheometer (Flat Die Rheometer)

GEHMAN’S TORSION TESTER

GAS PERMEABILITY TESTER

Rubber Two Roll Mill

Geer's Aging Oven

DIN Abrasion Tester

Wallace Rapid Plastimeter

4386 Bench Top Laboratory Manual Press with Electrically Heated Platens