Foam Tester

50 TONS LABORATORY PRESS MACHINE with ELECTRIC HEATING WATER COOLING TYPE. The material is placed in the casting mould and clamped between the electric-heating flat plates to apply pressure and temperature for making the material shape, testing and serving as the basis for the ingredient of mass production. It has the function of automatic and manual operation switching.

Gas permeability tester

GAS PERMEABILITY TESTER MS 4510

Ueshima Model : AB-5100 Series Cable Abrasion Tester

- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS -

CT Compression Molding Machine or CT hydraulic press, is for polymeric shaping in which the molding material, generally preheated, is first placed in an open, heated mold cavity.

United DSTM-10KN Universal Testing Machine

The MS-2152 Automatic Gravitometer measures density of rubber and plastics automatically. Consisting of a control box and an electronic balance with a bat lifting mechanism, it realizes a compact system. This equipment conforms to submerged replacement process (immersion method) described in JIS K7112 “Plastics – Methods of determining the density and relative density of non-cellular plastics”, JIS K0061 “Test methods for density and relative density of chemic