Product

Tìm kiếm sản phẩm

Tên sản phẩm

Từ giá

Đến giá

TÌM KIẾM SẢN PHẨM

Outstanding product

The Spe-ed™ SFE-2 lab-scale supercritical fluid extraction

Fractionated extraction of saponins from Vietnam ginseng using supercritical CO2, ethanol

Supercritical fluid extraction of cordycepin and adenosine from Cordyceps kyushuensis and purification by high-speed counter-current chromatography

Micro Algae | Uses for Supercritical Fluids

Aerogels | Uses for Supercritical Fluids

Applied Separations

Online support

Tel: 0908866933 - secovina@vnn.vn

Supercritical Fluid Systems

Multitube Vortexer

Supercritical Extraction System

DIN Abrasion Tester

Lab Scale Freeze Dryer

Facebook

Thống kê truy cập

Đang online 0
Hôm nay 0
Hôm qua 0
Trong tuần 0
Trong tháng 0
Tổng cộng 0

GAS PERMEABILITY TESTER

(2 đánh giá)

Mã sản phẩm : MS-4510

Xuất xứ : Ueshima - Japan

Bảo hành : 12 months

GAS PERMEABILITY TESTER MS 4510

Giá sản phẩm :

Detail

Name	Gas Permeability Tester
Model	MS-4510
Test sample dimensions	Diameter: 90mm, thickness: 10μm to 3μm, transmission diameter: 70mm
Number of test cells	3 (Three specimens can be tested simultaneously.)
Test temperature range	0 to 80℃
Range of transmission rate measurement	3 to 6,000(cc/㎡・24Hr・ATM)
Measurement gas pressure	High pressure: 0 to 200kpa abs Low pressure: 0 to 1.3kpa abs
Measurement gas	O2、N2、CO
Test items	High pressure side gas pressure, low pressure side gas pressure, temperature, gas permeability rate (GTR), gas permeability coefficient (P), diffusion coefficient (D), gas solubility coefficient (S)
Data processing by PC	Graph display, pressure value display, temperature display, measurement data acquisition
Power supply required	AC100V/220V 1A 50Hz/60Hz
Ambient conditions	(1) Temperature: 5 to 40℃ (2) Humidity: 35 to 80%RH
Dimensions and weight	Measuring Equipment 840（W） x 360（D） x 534（H）mm 60kg Temperature Controlled Bath 575（W） x 405（D） x 518（H）mm 31kg Vacuum Pump 170（W） x 488（D） x 250（H）mm 26kg
Accessories	Camber (0cc、10cc), filter paper, vacuum grease

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

50 TONS LABORATORY PRESS MACHINE with ELECTRIC HEATING WATER COOLING TYPE. The material is placed in the casting mould and clamped between the electric-heating flat plates to apply pressure and temperature for making the material shape, testing and serving as the basis for the ingredient of mass production. It has the function of automatic and manual operation switching.

Gas permeability tester

Cable Abrasion Tester

Ueshima Model : AB-5100 Series Cable Abrasion Tester

Laboratory Two Roll Mill

- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS -

Auto-Hydraulic press

CT Compression Molding Machine or CT hydraulic press, is for polymeric shaping in which the molding material, generally preheated, is first placed in an open, heated mold cavity.

Universal Testing Machine

United DSTM-10KN Universal Testing Machine

AUTOMATIC GRAVITOMETER

The MS-2152 Automatic Gravitometer measures density of rubber and plastics automatically. Consisting of a control box and an electronic balance with a bat lifting mechanism, it realizes a compact system. This equipment conforms to submerged replacement process (immersion method) described in JIS K7112 “Plastics – Methods of determining the density and relative density of non-cellular plastics”, JIS K0061 “Test methods for density and relative density of chemic

The Spe-ed™ SFE-2 lab-scale supercritical fluid extraction

Flat Die Rheometer (FDR)

Mooney Viscometer

Multi-Tube Vortexer