Hardness Tester

UNITED TRU-BLUE II Computerized Hardness Tester

Model: TB-II/10

. Vertical Capacity: 10"

. Throat Depth: 5.5"

. Easy to use menu selection for test setup.

. Regular Scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, and V.

. Superficial Scales: 15N,30N, 45N, 15T, 30T,

45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y and 45Y.

. Closed loop control of test cycle.

. Application of force measured via Load Cell.

. 5 preset test dwell times in accordance with ASTM E-18.

. Statistical Summary including: Hardness

Scale, Average, Range, Hi/ Low, and Number of Tests.

. Auto-Correction of hardness values when testing cylindrically shaped parts.

. Auto-Conversion of hardness values to another hardness scale and tensile strength in KSI or

MPa. Conversion data is based on ASTM E-140 and ASTM A-370 conversion charts.

. Audio/Visual alert for out of tolerance parts.

. PS/2 connector for data input via external keyboard.

. RS-232 port for computer data collection.

. Parallel port for printer.

. Input data (20 characters) via external keyboard for part identification. Data is printable.

. Bi-directional application of testing via Elevating Unit or control panel.

. Audible alert for manual application of preload force.. Adjustable Audible Alert.

. 4x20 Bright Vacuum Fluorescent Display.

. Front panel controls with Piezo-Electric switches.

. Auto self test and last test setup recall at startup.

. Removable Clamping Device for securing irregular shaped or oversize parts to be tested.

. 20 bit analog to digital converters for force and depth measurements.

. Co-Axial mounting of Force and Depth transducers.

. Manual, hex driver for indenters and power cord.

. Factory Certificate for Direct Verification of Load, Depth, Hysteresis and Dwell Timing.

. Factory certificate for indirect verification of scales

available.

. Indenters, anvils and test blocks must be ordered separately.

. 2-Year factory Warranty.

. CE Certified.

POWER REQUIREMENTS:

110 or 220VAC 50/60 Hz 1 Phase, 1 Amp.

Idle power consumption: 5 watts.

DIMENSIONS: 8"W x 20"D x 33.5"H

WEIGHT: 185 lbs. (84 Kg)

UNITED Testing Kit (C Diamond)

. Basic accessories necessary to conduct a test:

. "C" Diamond Indenter; certified to test A, C and D scales.

. 1/4 inch (6mm) Flat Anvil.

. 2-1/2 (63.5mm) Flat Anvil.

, 1-1/2 inch (38mm) "V" Anvil.

. 3 Hardness Test Blocks (customer to select hardness scales & ranges)

. Indenter and blocks come with ASTM & ISO certifications.

UNITED Testing Kit (1/16 Ball)

. Basic accessories necessary to conduct a test:

. "1/16" Carbide Ball Indenter; certified to test B, F, G, 15T, 30T & 45T scales.

. 1/4 inch (6mm) Flat Anvil.

. 2-1/2 (63.5mm) Flat Anvil.

, 1-1/2 inch (38mm) "V" Anvil.

. 3 Hardness Test Blocks (customer to select hardness scales & ranges)

. Indenter and blocks come with certifications.