Material Testing Equipment

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing: Constant-stress/strain flexometer. This machine determines change in complex modulus of elasticity E', E", tan6 and heating rate of rubber during the thermal fatigue process. Standard: ISO 4666, JIS K 6265,...

DRC Two Roll Mill

MST Cup for Latex Mechanical Stability Tester

Natural rubber latex concentrate - Determination of mechanical stability Use suitable for all machines: Klaxon, Secomak, Thailand, USA, Vietnam,....

Rây lọc chất bẩn cao su TCVN 6089-ISO 249

Ageing Chamber Standards: BS ISO 2930 ASTM D 3194 For use with the Rapid Plastimeter to calculate PRI, Plasticity Retention Index, widely used to grade natural rubber

Heating Presses for COLOUR INDEX TEST TCVN 6093

Rubber two roll mill Conforms to ISO 2393

Gas permeability tester

Ueshima Seisakusho VR-1130 Mooney Viscometer ●Measurement of Mooney viscosity for unvulcanized rubber ●Measurement of scorch time for unvulcanized rubber Applied Standard JIS K 6300-1, ISO289, ASTM D 1646

JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter） FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd.

Rubber loses resiliency as temperature goes down. The frozen rubber can't keep its essential characteristics under the temperature below Glass Transition Point. In fact, the rubber applications under severe environments such as vehicle tire in frozen area and aircraft components in the stratosphere are seriously affected. Our Gehman's torsion tester TM-2535 is the most popular testing machine for this purpose and is adopted by JIS K6261(Equivalent to ISO 1432, ASTM D1053).

Ueshima Model : AB-5100 Series Cable Abrasion Tester

The MonTech Rapid Plastimeter

The MonTech ageing oven for plasticity testing ages rubber in accordance with international testing standards. In conjunction with the MonTech Plastimeter, it allows the user to determine the Plasticity Retention Index (PRI) of raw natural rubbers.

Rubber Two Roll Mill

Klaxon Latex Mechanical Stability Tester

Hydraulic Laboratory Press with safety shield and heated platens Manually operated Clamp Specifications: Clamping force 12 tons Daylight opening 0" - 15" Factory Set @ 5" Stroke 5 1/8" Two (2) fully-threaded columns Heated platen package, including: Two (2) 6" x 6" electrically-heated steel platens Temperature range up to 343 deg. C One (1) digital temperature controller per platen 0-24,000 lb. Analog pressure gauge 230 volt, 1ph supply voltage Light gray safety shield Dark gray frame Electrical

Ovens for many applications. Temperature : max. 300°C The FRANCE ETUVES XUE universal ovens are suitable for all applications for drying, heating, heat preservation, sterilization, component aging, curing or any other thermal test in laboratories and in all sectors of industry. There are 8 standard volumes : 32, 58, 112, 225, 343, 490, 686 and 980 liters.

Infrared stove

Heating Mantles

Banks of heating mantles for digestion, kjeldahl and soxhlet extraction

TCVN 6091 (ISO 1656) Kjeldahl distillation for rubber nitrogen distillation: Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content

Ueshima VR-1130 Mooney Vicometer

Ueshima VR-3110 Rotorless Rheometer (Flat die rheometer - FDR) Applied Standards JIS K6300-2, ISO 6502, ASTM D 5289. Application: -Measurement of vulcanization characteristics of compounded rubber along with the vulcanization process. - Measurement of viscosity of raw and compounded rubber.

DSTM-5KN Universal Testing Machine

Lab Furnace

Merit water still W4000

Manufactured thick, robust and heat resistant borosilicate 3.3 glass without a vacuum stopcock. Featured with a 2-way high vacuum stopcock enabling consistent and uniform vacuum draw and release. Vacuum stopcock can hold maximum vacuum of 1 Torr more than 24 hours. Excellent smooth grinded body and lid flanges guarantees airtight closure. Supplied with a porcellain perforated desiccator plate.

Benchmark 3760-SE magnetic stirrer

Duty Digital Thermostatic Controller Drums Mixer 20 Liters Standard: ASTM D1559, EN 1269, EN 1269/35, BS 598-107

Marshall Stability Compression 50kN Standard: ASTM D1559, D5581, AASHTO T245

This compression/flexural tester is mainly usd to check concrete specimen anti-flextural performance,and cement etc. construction material comrpession test. Adopt hydraulic loading, electric measuring,digital display load, loading rate, peak value etc. woith overload protection function.

United DFM-600kN Universal testing machine are the logical choice when maximum crosshead travel and load frame capacity are required. The DFM models offer a choice of four standard load frame capacities.

The United TRU-BLUE Rockwell Hardness Tester is computer controlled (closed loop) application of forces are via load cell measurement. Standards: ASTM E18 Metals, ASTM D785 Plastics, ISO 6508 Metals. Brinell Test method ASTM E10, ISO 6506.

- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS -