Products

mỗi trang
Nabertherm Muffle furnace Model LT 9/11

Nabertherm Muffle furnace Model LT 9/11

Nabertherm Muffle furnace Model LT 9/11

Nabertherm LT 5/11 Furnace

Nabertherm LT 5/11 Furnace

Nabertherm LT 5/11 Furnace

Nabertherm Muffle furnace LT 15/11

Nabertherm Muffle furnace LT 15/11

Muffle furnace
LT 15/11 [L-155H1ANL]
1.00 piece 4,830.00 - 30.00 % 3,381.00
• Controller B510
 

AB-1150 LAMBOURN ABRASION TESTER

AB-1150 LAMBOURN ABRASION TESTER

Among various abrasion tester for rubber such as tire, belt, and sole etc., it is Lambourn Type Abrasion Tester that is evaluated as the best reappearance in JIS K6264(Abrasion Testing Method of Vulcanized Rubber) as well as high correlation with the result of product test.

FPS WEAR TESTING SYSTEM

FPS WEAR TESTING SYSTEM

A Lambourn abrasion tester or conventional FPS tester, which is used for abrasion tests of high polymer material for such products like tire and belt, controls slip ratio or speed difference between test piece and road wheel while doing an abrasion test.

* FPS stands for Field Performance Simulation.

TR Tester

TR Tester

This device measures the retraction rate of elongation when a specimen is subjected to a certain elongation, frozen, and then gradually warmed up. The encoder is used to measure the retraction, and a PC is used to set test conditions, display data (TR value, retraction rate), draw graphs (temperature, retraction rate), and save the results to a file. Standard JIS K 6261-4,ISO2921,ASTM D 1329.

Akron Abrasion Tester

Akron Abrasion Tester

ISO 23794:2023: Rubber, vulcanized or thermoplastic — Abrasion testing: Ueshima AB-1511 Akron Abrasion Tester

Constant-stress/strain flexometer

Constant-stress/strain flexometer

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing: Constant-stress/strain flexometer. This machine determines change in complex modulus of elasticity E', E", tan6 and heating rate of rubber during the thermal fatigue process. Standard: ISO 4666, JIS K 6265,...

Dupont Impact Tester

Dupont Impact Tester

Dupont’s Impact Tester is used to measure the resistance of specimen (painted plate, hard plastic sheet, etc.) against impact force by observing the appearance of crack and peeling.
 

lab-scale supercritical fluid extraction

lab-scale supercritical fluid extraction

The Spe-ed™ SFE-2 and Spe-ed SFE-4 are the original SFEs in our series of instruments for supercritical fluid extraction.

15ml Falcon Laboratory centrifuges

15ml Falcon Laboratory centrifuges

Benchmark's LC-8 Series of laboratory centrifuges are uniquely designed to meet a wide range of applications in both the clinical and research laboratory.

BSH-5002

BSH-5002

Benchmark's myBlock Dry bath is a "next generation" product line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature.

DRC Two Roll Mill

DRC Two Roll Mill

DRC Two Roll Mill

BEADBUG™ 6 POSITION HOMOGENIZER

BEADBUG™ 6 POSITION HOMOGENIZER

Benchmark D1036-E DBEADBUG™ 6 POSITION HOMOGENIZER Fast, efficient bead homogenization Process up to 6 samples simultaneously For all sample types, from soft tissue to bone Accepts 2.0ml or 5.0ml tubes Full range of bead materials and sizes are available

Mini air cooled industrial Chiller

Mini air cooled industrial Chiller

Mini air cooled industrial Chiller

Air-cooled Chiller

Air-cooled Chiller

Air-cooled Chiller

MST Cup

MST Cup

MST Cup for Latex Mechanical Stability Tester

0.45µm sieve for filtering dirt in rubber

0.45µm sieve for filtering dirt in rubber

0.45µm sieve for filtering dirt in rubber

Rubber two roll mill with Variable speed

Rubber two roll mill with Variable speed

Rubber two roll mill with Variable speed

Latex Mechanical Stability Tester

Latex Mechanical Stability Tester

Latex Mechanical Stability Tester (MST)

Laboratory Rubber Two Roll Mill

Laboratory Rubber Two Roll Mill

Lab Two roll Mill Conforms to ISO 2393 Manufacturer: Vietnam. Conforms to ISO 2393 Roll Length: 300 mm. Roll Diameter: 150 mm. Two-Roll Mill consists of two rolls made of steel with hard Niken plating. Adjustable Nip: 0,2 to 8 mm. Rear Roll Speed(Slow): 24 ± 1 rpm. Front/Rear Roll Speed Ratio(Friction Ratio): 1: 1,4. Safety emergency stop, and roll reverse-direction switch. Drive Motor : 1 x7.5Hp

the cup for Latex mechanical stability

the cup for Latex mechanical stability

Natural rubber latex concentrate - Determination of mechanical stability Use suitable for all machines: Klaxon, Secomak, Thailand, USA, Vietnam,....

Specimen Cutting Press

Specimen Cutting Press

Specimen Cutting Press for preparation of test specimens of rubber and plastic materials.
Freeze-drying unit Sublimator 40

Freeze-drying unit Sublimator 40

Freeze-drying unit Sublimator 40 1,69m² to 2.70m² Product storage space External dimensions WxHxD: 980 x 1920 x 1650mm (standard version)

Helix™ Supercritical CO2 System Custom 5L System

Helix™ Supercritical CO2 System Custom 5L System

Helix™ Supercritical CO2 System Custom 5L System

Rây lọc chất bẩn cao su TCVN 6089-ISO 249

Rây lọc chất bẩn cao su TCVN 6089-ISO 249

Rây lọc chất bẩn cao su TCVN 6089-ISO 249

XFM020 Vacuum oven

XFM020 Vacuum oven

XFM020 Vacuum oven
H2010 Incu-Shaker Shaking Incubator

H2010 Incu-Shaker Shaking Incubator

H2010 Incu-Shaker Shaking Incubator Large 18 x 18", up to 5 x 2L TOUCH screen control over time, speed and temperature Exceptional temperature uniformity Horizontally circular 19mm orbit for aeration & mixing Instantly change flask clamps with MAGic Clamp™ accessories Optional shelf for Petri dishes, microplates, etc.

Vaccine Freeze dryer Sublimator 80-3

Vaccine Freeze dryer Sublimator 80-3

Zirbus Freeze dryer Sublimator 80-3 with Hydraulic stoppering system, 3m² shelf, 80kg condenser, cGMP, SIP, CIP, FAT, SAT...

Pilot/Laboratory Freeze Dryer

Pilot/Laboratory Freeze Dryer

Zirbus Pilot/Laboratory Freeze Drying Unit Sublimator 5 Ideal for Development of Process Engineering / Research / Small Productions, GMP conformity...Lab Freeze dryer, Pilot Freeze dryer

Freeze dryer Sublimator 15

Freeze dryer Sublimator 15

Zirbus Freeze dryer Sublimator 15 used in Laboratory or produce. Food Freeze dryer, Vaccine freeze dryer, probiotic freeze dryer...

Freeze dryer Sublimator 25

Freeze dryer Sublimator 25

Zirbus Freeze dryer Sublimator 25 used in Laboratory or produce with cGMP-FDA conform, CIP/SIP. Food Freeze dryer, Vaccine freeze dryer, probiotic freeze dryer...

Sublimator 10EKS Freeze dryer

Sublimator 10EKS Freeze dryer

Zirbus Sublimator 10EKS Freeze dryer

Freeze Dryer Sublimator 10EKS

Freeze Dryer Sublimator 10EKS

Zirbus Freeze Dryer Sublimator 10EKS wih Max. condensor capacity: 15kg, Shelf area 1.26m2

Freeze Drying Plant Sublimator 50

Freeze Drying Plant Sublimator 50

Freeze Drying Plant Sublimator 50 with 2.4m² shelves, -50°C condenser, 25kg ice capacity

Heat pump dryer GUDO-100T

Heat pump dryer GUDO-100T

Máy sấy lạnh GUDO-100T

Top

  Zalo