Universal Hardness Tester

UNITED TRU-BLUE II Computerized Hardness Tester
. Vertical Capacity: 10"
. Throat Depth: 5.5"
. Easy to use menu selection for test setup.
. Regular Scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, and V.
. Superficial Scales: 15N,30N, 45N, 15T, 30T,
45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y and 45Y.
. Closed loop control of test cycle.
. Application of force measured via Load Cell.
. 5 preset test dwell times in accordance with ASTM E-18.
. Statistical Summary including: Hardness
Scale, Average, Range, Hi/ Low, and Number of Tests.
. Auto-Correction of hardness values when testing cylindrically shaped parts.
. Auto-Conversion of hardness values to another hardness scale and tensile strength in KSI or
MPa. Conversion data is based on ASTM E-140 and ASTM A-370 conversion charts.
. Audio/Visual alert for out of tolerance parts.
. PS/2 connector for data input via external keyboard.
. RS-232 port for computer data collection.
. Parallel port for printer.
. Input data (20 characters) via external keyboard for part identification. Data is printable.
. Bi-directional application of testing via Elevating Unit or control panel.
. Audible alert for manual application of preload force.. Adjustable Audible Alert.
. 4x20 Bright Vacuum Fluorescent Display.
. Front panel controls with Piezo-Electric switches.
. Auto self test and last test setup recall at startup.
. Removable Clamping Device for securing irregular shaped or oversize parts to be tested.
. 20 bit analog to digital converters for force and depth measurements.
. Co-Axial mounting of Force and Depth transducers.
. Manual, hex driver for indenters and power cord.
. Factory Certificate for Direct Verification of Load, Depth, Hysteresis and Dwell Timing.
. Factory certificate for indirect verification of scales
available.
. Indenters, anvils and test blocks must be ordered separately.
. 2-Year factory Warranty.
. CE Certified.
POWER REQUIREMENTS:
110 or 220VAC 50/60 Hz 1 Phase, 1 Amp.
Idle power consumption: 5 watts.
DIMENSIONS: 8"W x 20"D x 33.5"H
WEIGHT: 185 lbs. (84 Kg)
UNITED Testing Kit (C Diamond)
. Basic accessories necessary to conduct a test:
. "C" Diamond Indenter; certified to test A, C and D scales.
. 1/4 inch (6mm) Flat Anvil.
. 2-1/2 (63.5mm) Flat Anvil.
, 1-1/2 inch (38mm) "V" Anvil.
. 3 Hardness Test Blocks (customer to select hardness scales & ranges)
. Indenter and blocks come with ASTM & ISO certifications.

UNITED Testing Kit (1/16 Ball)

. Basic accessories necessary to conduct a test:
. "1/16" Carbide Ball Indenter; certified to test B, F, G, 15T, 30T & 45T scales.
. 1/4 inch (6mm) Flat Anvil.
. 2-1/2 (63.5mm) Flat Anvil.
, 1-1/2 inch (38mm) "V" Anvil.
. 3 Hardness Test Blocks (customer to select hardness scales & ranges)
. Indenter and blocks come with certifications.