(1 đánh giá)

CTE

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

LABORATORY PRESS MACHINE

LABORATORY PRESS MACHINE

50 TONS LABORATORY PRESS MACHINE with ELECTRIC HEATING WATER COOLING TYPE. The material is placed in the casting mould and clamped between the electric-heating flat plates to apply pressure and temperature for making the material shape, testing and serving as the basis for the ingredient of mass production. It has the function of automatic and manual operation switching.

Cable Abrasion Tester

Cable Abrasion Tester

Ueshima Model : AB-5100 Series Cable Abrasion Tester
Laboratory Two Roll Mill

Laboratory Two Roll Mill

- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS -

Auto-Hydraulic press

Auto-Hydraulic press

CT Compression Molding Machine or CT hydraulic press, is for polymeric shaping in which the molding material, generally preheated, is first placed in an open, heated mold cavity.
Universal Testing Machine

Universal Testing Machine

United DSTM-10KN Universal Testing Machine

Top

  Zalo