LABORATORY PRESS MACHINE

1. Automatic operation
2. Capacity: ≥50 tons
3. Two temperature controllers for both platens
4. Temperature range: ≥350℃
5. Controller: LED digital display, with button setting input
and value display output
6. Temperature accuracy:±2℃
7. Distance between two column: ≥ 360 mm
8. Two timers for curing and cooling time
9. Heating and cooling in platens
10. Heating method: Electro-thermal tube
11. Cooling method: Tap water cooling(Water connection port supplied by customer)
12. Heating-up time: Normal temperature~200℃, about 35 min
13. Timer: LED digital display, 0.1S～99M～9.9H, time is settable
14. Exhausting frequency: 0～10 times can be set
15. Gradient pressure: 2 stages, 1st and 2nd stage pressure can be preset
16. Pressure gauge: 0～350kg/cm2
17. Heat pressing plate: ≥300×300mm
18. Cooling pressing plate: ≥300×300mm
19. Max stroke: ≥150 mm
20. Working layer: Single work layer. The upper and lower
plates both have heating and cooling system function.
21. Material of pressing plate: SKD chrome molybdenum alloy
22. Surface of pressing plate: HRC60 mirror chrome plating

23. Oil pressure system: GPY oil pump drives high-performance electric fluid injection and the non-resistance fuel tank carries out constant speed control mode with the functions of automatic compensation and time delay stopping of the fuel tank
24. Oil pressure media: Mobil 32# anti-freezing hydraulic oil（Provided by the customer）
25. Volume: 920×470×1470(W×D×H)mm
26. Power supply: 3∮, AC220V, 20A, three-phase and five-line（The connection port is provided by the customer）
27. Weight: About 658kg
■Accessory: Stainless steel mirror retainer plate
300×300mm×1*2 pieces
■Files: Manual and Product quality assurance card
■Epoxy mold: 2 pcs( just simple but need dimensions)