Auto-Hydraulic press

(2 đánh giá)

Mã sản phẩm : PR2D-W300L350-PM-WCL

Xuất xứ : Chareon Tut

Bảo hành : 12 months

CT Compression Molding Machine or CT hydraulic press, is for polymeric shaping in which the molding material, generally preheated, is first placed in an open, heated mold cavity.

Giá sản phẩm :

Detail

Pressure adjustment by electrical pressure switch.
Electrical valves to control up-down directions of compression plate.
The hydraulic components are easily accessible for quick maintenance.
Safety door for user protection.
Safety valve for over-pressure protection.
Pressure releasing system in the case of electrical power failure.
Pressure holding system to extend pressure pump life-time and to save energy.
Automatic de-compression with setting timer.
Automatic air repelling system is an optional.
Cooling plate for rigidifying plastics is an optional.

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

50 TONS LABORATORY PRESS MACHINE with ELECTRIC HEATING WATER COOLING TYPE. The material is placed in the casting mould and clamped between the electric-heating flat plates to apply pressure and temperature for making the material shape, testing and serving as the basis for the ingredient of mass production. It has the function of automatic and manual operation switching.

Cable Abrasion Tester

Ueshima Model : AB-5100 Series Cable Abrasion Tester

Laboratory Two Roll Mill

- 2 HORIZONTAL ROLL EACH 4×12(IN) DIAMETER×FACE WIDTH) - HARDNESS 60 HRC (= 800 HV) OR ABOVE - CHROMING DEPTH 0.1 mm - 0.5 μm ROUGHNESS - POLISHING RA 0.05 - 2 SET OF TEMPERATURE CONTROLLER - 1 SET OF 6 POLE 2HP MOTOR AND REDUCER - FRONT ROLL ABOUT 20 R.P.M.、REAR ROLL ABOUT 24 R.P.M. (RATIO 1:1.2) - ROLLER GAP (SHEETING-OUT THICKNESS) 0.12 – 7mm - ELECTRIC HEATING SYSTEM MAX 210℃ - EACH 1.5KW TOTAL 3KW - 2 SOLID HANDWHEELS FOR THE ADJUSTMENT OF SHEETING-OUT THICKNESS -