Product List
Product Search
Featured Products
Featured News
Online support
Tel: 0908866933 - secovina@vnn.vn
Supercritical Fluid Systems
Multitube Vortexer
Supercritical Extraction System
DIN Abrasion Tester
Lab Scale Freeze Dryer
Thống kê truy cập
- Đang online 0
- Hôm nay 0
- Hôm qua 0
- Trong tuần 0
- Trong tháng 0
- Tổng cộng 0
Dupont Impact Tester
IM-4510
Japan
12 months
Dupont’s Impact Tester is used to measure the resistance of specimen (painted plate, hard plastic sheet, etc.) against impact force by observing the appearance of crack and peeling.
Dupont’s Impact Tester is used to measure the resistance of specimen (painted plate, hard plastic sheet, etc.) against impact force by observing the appearance of crack and peeling.
The impact force is given to the specimen which is inserted between a spherical impactor with specified radius and an anvil with the same hollow, by falling down the weight from specified altitude.
○Impactor and anvil can be selected from five different spherical sizes, and the weight can be selected from three weights, enabling tests under wide range of conditions.
○Compact shape, easy operation and high repeatability of test results
○ Single parts like impactor, anvil and weight are available, supporting long term use of the equipment
Applicable Standard: JIS K 5600-5-3（JIS K 5400）ISO-6272 (Testing methods for paints)
Altitude of Weight: 5 to 50 cm (in 5 cm steps)
Impactor: Spherical radius of the tip: 1/16,1/8, 3/16, 1/4, 1/2 inches
Anvil: Dimple radius: A(1/4, 1/8 inches), B(1/16, 3/16 inches), C(Plain)
Weight 300g, 500g, 1000g
Other Accessories: Pin for weight, level, wooden box
Outer Dimensions(mm): Approx.470(W) x 330(D) x 800(H)
Bình luận
Sản phẩm cùng loại
Salt Spray (Salt Fog)
Salt Spray (Salt Fog) – ASTM B117 / ISO 9227 / JIS Z 2371 / ASTM G85 A1. This is the traditional technique to simulate corrosion in the laboratory, widely used to perform rapid corrosion tests on metal parts with organic or inorganic coatings. Its application mainly serves companies in the automotive, renewable energy, construction, plastics, aviation, oil and gas, paints, varnishes, electronics, chemical, metallurgical, and other industrial sectors.
Cyclic Corrosion Test (C.C.T)
The EQUILAM NA C.C.T Cyclic Corrosion Test chambers provide the best simulation for accelerated corrosion testing. Some studies indicate that the tests results closely resemble those obtained in outdoor exposure. Samples can be exposed to different environmental conditions. Contact Us: Email: secovina@vnn.vn OR Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816
Cyclic Corrosion Test CORR Auto
The EQUILAM NA CORR AUTO model cyclic corrosion test chambers provide one of the most realistic simulations for accelerated corrosion testing. Some studies indicate that the test results closely resemble those obtained in outdoor exposure. Contact Us: Email: secovina@vnn.vn OR Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816
Water Resistance Test Chamber – Humidity Test
Water Resistance Test Chamber – Humidity Test to ASTM D1735 / ASTM D2247 / DIN 50017 / ISO 6270-2.
Contact Us: Email: secovina@vnn.vn OR Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816 .
Kesternich Corrosion Chamber – SO2
The corrosion chambers type SO2, KEQ series, also known as Kesternich chamber, were built to meet the requirements of ASTM, DIN, DIN EN ISO, others. Contact Us: Email: secovina@vnn.vn OR Mr. Felipe Rojo, Email: frojo@equilamna.com
Gravelometer / Stone Chip Resistance Test
The Gravelometer, or Chipping Resistance Tester, is designed to rigorously meet the technical standards of ASTM D3170, SAE J400, ISO 20567-1, DIN 55996-1, and VDA. For other standards, please contact us. Contact Us: Email: secovina@vnn.vn OR Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816 .
Accelerated Weathering Tester – UV
The accelerated weathering test simulates the atmosphere with sunlight (UV mode), dew (condensation mode), rain (thermal shock) and rain + UV (thermal shock and UV). The test results are reliable, fast and comply with the technical standards ASTM D4329, ASTM G154, ASTM G151, ASTM G53, SAE J2020, ISO 4892-3, among others. Contact Us: Email: secovina@vnn.vn OR Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816 .
IPX9K Code
IPX9K Code Test Chamber Standards : ISO 20653, IEC 60529. Contact Us: Email: secovina@vnn.vn OR Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816
Solids Density Meter
Solids Density Meter
Application:rubber,plastic,cables,hard alloy,glass,new materials researching laboratory.
Standards:According to ASTM D792,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T208,GB/T5163,GB/T 1933 standards etc.
DH300 is one of the densimeter that have been widely applying to industry,using water as medium,the density value can be displayed after two steps.Compared with traditional densimeter,there is no calculation by hand,which is more convenient.
Flexometer
The Constant Stress/Strain Flexometer measures the heating characteristics of a vulcanized rubber test piece when applied test amplitude the load(stress)controlling to a specified level applying to static load.It also performs tests by controlling a specified deflection(strain).Unlike conventional flexometers,this equipment adopts a special temperature detector to measure the inner temperature of a test piece during testing,thus making it possible to measure the real heat-up temperature.The test
Internal Mixer
CT Internal Mixer is suitable for many applications:
- Polymer and/or rubber compound.
- Polymer and/or rubber composite.
- Polymer and/or rubber blend.
- Food and food product i.e. starch modification.