Product
Tìm kiếm sản phẩm
Outstanding product
HOT News
Applied Separations
Online support
Tel: 0908866933 - secovina@vnn.vn
Supercritical Fluid Systems
Multitube Vortexer
Supercritical Extraction System
DIN Abrasion Tester
Lab Scale Freeze Dryer
Thống kê truy cập
- Đang online 0
- Hôm nay 0
- Hôm qua 0
- Trong tuần 0
- Trong tháng 0
- Tổng cộng 0
Rotorless rheometer (Flat Die Rheometer)
VR-3110 Series
Ueshima
12 months
JIS K6300-2, ISO 6502, ASTM D 5289 (Oscillating Sealed Flat Die Cavity Rotorless Curemeter） FDR (Flat Die Rheometer), manufactured by Ueshima Seisakusho Co., Ltd.
|
Name |
FDR（Flat Die Rheometer) |
|
Model |
VR-3110 |
|
Shape of Die |
No friction flat sealed cavity（JIS K 6300-2, ISO 6502, ASTM D 5289 compliant） |
|
Pressurizing Method |
Pneumatic Cylinder (Oil-less type) Cylinder Inner Diameter: 160mm |
|
Oscillation Drive Method |
Sinusoidal Vibration Mechanism by Conical Rotational Motion “Cone Drive” |
|
Oscillation Drive Motor |
Synchronous Motor 25W AC |
|
Oscillation Transmitting Method |
Elastic Connection by Leaf Spring |
|
Frequency |
1.67Hz (100cpm） |
|
Oscillation Angle |
±1° |
|
Oscillation Angle Accuracy |
2±0.03°(Without Load） |
|
Torque Detecting Method |
Strain Gauge Type Load Cell |
|
Torque Transmission Method |
Elastic Connection by Leaf Spring |
|
Testing Temperature Range |
50 to 230° C |
|
Temperature Control Accuracy |
Die Temperature: ±0.3° C at 190° C Internal and External Die Temperature Difference: ±1.0° C at 190° C |
|
Heat Control Method |
Independent PID Control on four pieces of Film Heaters (Upper / Lower Die, Upper Outer / Lower Outer Die) |
|
Temperature Sensor |
Platinum Resistance Sensor (Pt100) 4pcs |
|
Maximum Testing Time |
9999minutes |
|
Shield Cover |
Colored Acrylic on Front and Sides (Preventing external air and for Safety) |
|
Safety Equipment |
(1) Two-hand Press Start Switch (Cylinder lifts only when both buttons are pressed simultaneously.) (2) Overload Protection (more than 22N･m) (3) Overheat Protection (Heater will be turned off at 240° C or higher.) |
|
Communications |
RS232C |
|
Utilities |
(1) Power Source AC100V/220V, Single Phase, Power Consumption less than 700VA (2) Dry Air 0.343 to 0.686MPa |
|
Environmental Conditions |
(1) Temperature 5 to 40° C (2) Humidity 35 to 80%RH (No Dew Condensation) |
|
Dimensions and Weight |
Approx.333(W)×520(D)×780(H)mm, Approx.110kg |
|
Standard Items |
(1) Equipment main unit: 1 set (2) Accessories 1set (Software, Special Tool, Minimum Consumable Parts etc.） |
Option:
●Sponging Pressure Measurement
[Application] It is useful for research/development and production line control on sponge rubber to examine
sponging pressure and relationship between blowing agent reaction and vulcanization of sponge rubber.
●Programmable Temperature Control
[Application] It simulates vulcanization of large sized rubber products, continuous vulcanization, mold vulcanization, etc. to examine vulcanization characteristics with rising temperature at a preset temperature rise.
Bình luận
Sản phẩm cùng loại
Mooney Viscometer
Ueshima Seisakusho VR-1130 Mooney Viscometer ●Measurement of Mooney viscosity for unvulcanized rubber ●Measurement of scorch time for unvulcanized rubber Applied Standard JIS K 6300-1, ISO289, ASTM D 1646
Constant-stress/strain flexometer
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing: Constant-stress/strain flexometer. This machine determines change in complex modulus of elasticity E', E", tan6 and heating rate of rubber during the thermal fatigue process. Standard: ISO 4666, JIS K 6265,...
GEHMAN’S TORSION TESTER
Rubber loses resiliency as temperature goes down. The frozen rubber can't keep its essential characteristics under the temperature below Glass Transition Point. In fact, the rubber applications under severe environments such as vehicle tire in frozen area and aircraft components in the stratosphere are seriously affected. Our Gehman's torsion tester TM-2535 is the most popular testing machine for this purpose and is adopted by JIS K6261(Equivalent to ISO 1432, ASTM D1053).
Geer's Aging Oven
Rubber and plastic products will be deteriorated gradually by oxidation or influence of heat and sunlight in a long time of use depending on the environment. Moreover, it may not only result in degradation of the necessary performance which was secured in the beginning but also result in a big accident in some cases. Applicable Standard JIS K 6257, ISO 188, JIS K 7212 B Type/JIS K 7212, ISO 4577
DIN Abrasion Tester
The DIN Abrasion Tester is of the type that rotates a drum with grinding cloth wound around the surface at a specified speed, presses the sample against the grinding cloth. Applicable Standard: JIS K 6254-2/ISO4649/ISO23794 Test Piece Size: 16.2±0.2mm dia, 6mm or thicker Drum Size: 150±0.2mm dia., 460mm wide Drum Speed: 40±1rpm
Wallace Rapid Plastimeter
4386 Bench Top Laboratory Manual Press with Electrically Heated Platens
