Product
Dịch vụ
Applied Separations
Online support
Tel: 0908866933 - secovina@vnn.vn
Thống kê truy cập
- Đang online 0
- Hôm nay 0
- Hôm qua 0
- Trong tuần 0
- Trong tháng 0
- Tổng cộng 0
Geer's Aging Oven
AG- Series
Ueshima
12 months
Rubber and plastic products will be deteriorated gradually by oxidation or influence of heat and sunlight in a long time of use depending on the environment. Moreover, it may not only result in degradation of the necessary performance which was secured in the beginning but also result in a big accident in some cases. Applicable Standard JIS K 6257, ISO 188, JIS K 7212 B Type/JIS K 7212, ISO 4577
Outline
Rubber and plastic products will be deteriorated gradually by oxidation or influence of heat and sunlight in a long time of use depending on the environment. Moreover, it may not only result in degradation of the necessary performance which was secured in the beginning but also result in a big accident in some cases.
The Geer's Aging Oven is a most popular oven to make the sample in the environment where new heated air is always supplied in a constant rate, thus promoting aging.
The series conform to JIS K 6257 (Rubber, vulcanized or thermoplastic - Determination of heat ageing properties) and/or JIS K 7212 (Plastics − Determination of thermal stability of thermoplastics − Oven method). Each of the four models provides different air exchange rate and chamber size. AG-1100 (analog setting) series and AG-1200 (digital setting) series are different in setting method of air exchange rate.
Feature:
○Most important functions like temperature uniformity, wind velocity and air ventilation rate are in accordance with JIS K 6257 and/or JIS K 7212.
○The minimized shape of the series allows use on a table. We also provide with an exclusive stand.
○It is able to place two units in tiers, minimizing the footprint.
Specification
MODEL |
For Rubber & Plastics |
For Plastics |
|||
Standard |
Large Type |
Standard |
Large Type |
||
(*1) |
Analog Setting |
AG-1110 |
AG-1115 |
AG-1120 |
AG-1125 |
Digital Setting |
AG-1210 |
AG-1215 |
AG-1220 |
AG-1225 |
|
Applicable Standard |
JIS K 6257, ISO 188, JIS K 7212 B Type |
JIS K 7212, ISO 4577 |
|||
Chamber Dimensions (mm) |
W450 x D450 x H500 |
W600 x D600 x H600 |
W450 x D450 x H500 |
W600xD600xH600 |
|
Chamber Material |
Stainless Steel (SUS 304) |
||||
Temperature Range |
40 to 300ºC |
||||
Temperature Control |
Temperature controller with digital display, PID with auto tuning |
||||
Temperature Sensor |
Resistance thermometer bulb (Pt100Ω, 3.2-mm dia. x 350mm) |
||||
Temperature Sensor |
Platinum resistance temperature detector |
||||
Pt 100Ω,φ3.2 x250(L) |
Pt 100Ω,φ3.2 x300(L) |
Pt 100Ω,φ3.2 x250(L) |
Pt100Ω,φ3.2 x300(L) |
||
Heater |
1-ph 200V, 3kW |
3-ph 200V, 6kW |
1-ph 200V, 3kW |
3-ph 200V, 6kW |
|
Circulation Fan Motor |
200VAC, 0.2kW |
||||
Temperature Rising Time |
Within 45 min. from RT to 300ºC |
||||
Temperature Uniformity |
Within ±1ºC (40~100ºC), ±1% (at 100 ºC or higher) |
||||
Average Wind Speed |
0.5±0.1m/sec(*2) |
1.0±0.2m/sec(*3) |
|||
Ventilation Rate |
3 to 10 times/hour (variable) (*2) |
5 to 60 times/hour (variable) (*3) |
|||
Sample Hanger Rotation |
6~8 rpm |
||||
Safety Device |
(a) Leakage breaker: protection of short circuit, overcurrent (b) Overheat protector: default set to 325ºC, causes power shut down (c) Overload protection of circulation fan motor |
||||
Accessories |
Single shaft two stage sample hanging frame, sample clip, glass fuse |
||||
Power Supply Required |
1-ph 200VAC, 20A 50Hz or 60Hz |
3-ph 200VAC, 30A 50Hz or 60Hz |
1-ph 200VAC, 20A 50Hz or 60Hz |
3-ph 200VAC, 30A 50Hz or 60Hz |
|
Outer Dimensions (mm) |
W1050x D720xH860 |
W1250xD910xH990 |
W1050xD720xH860 |
W1250xD910x H990 |
|
Option Stand(mm) |
optional shelf board, optional exclusive stand(H:835mm(Standard),825mm(Large Type)) |
Bình luận