Freeze dryer Sublimator 15

Sublimator 15 Freeze Dryer

Manufacturer: Zirbus - Germany

Total shelf area: up to max. [m²]: 1,12 (Depending on the configuration)

Ice condenser capacity: 10 kg / 24h ,  max. 10kg

Condenser temperature: Version 1 : -50°C, Version 2: -75°C

External dimensions (WxHxD) [mm] (Standard version): 1300 x 1850 x 850

Liquid-tempered shelves Version I: -40... +60 °C

Liquid-tempered shelves Version II: -55... +60 °C

Tray Drying Configuration of the Sublimator 15:

Tray dimensions[mm]: 320 x 500

Number of shelves + radiation panel/Shelf area - spacing: 5+1 / 0,8m² - 75mm or 6+1 / 0,96m² - 60mm or 7+1 / 1,12m² - 50mm

Sublimator 15 configuration with vial stoppering:

Tray dimensions[mm]: 320 x 500

Number of shelves + radiation panel/Shelf area - spacing:  3+1 / 0,38m² - 130mm or 4+1 / 0,5m² - 95mm or 5+1 / 0,63m² - 75mm or 6+1 / 0,75m² - 60mm

Features / options of this series:

CIP (cleaning in place): Spray nozzles mounted in the chamber and condenser ensure intensive cleaning.

 SIP (sterilization in place) (from sublimator 15): Chamber and condenser are designed as pressure vessels, so that steam sterilisation in place is possible. Alternatively, H2O2 is also possible.

GMP-FDA compliant: Taking the guidelines into account, the systems meet the highest demands for production in compliance with cleanroom standards. The exact requirements are defined and implemented together with you.

 Liquid-tempered shelves made of stainless steel: For an even and rapid temperature distribution, the shelves are flooded with brine oil.

 Closure device for vials: The shelves can be automatically moved together after the drying process to seal vials under vacuum conditions. The optimal preservation.

 Air or water-cooled refrigeration system: Depending on the installation site, we can design the refrigeration systems to be air-cooled or water-cooled.

 Wall mounting (gas-tight): The front of the unit is installed gas-tight in a wall. This allows the service area to be separated from the production area.

 Oil-sealed and oil-free vacuum pump: If organic solvents are present, it may be useful to use an oil-free vacuum pump.

 Insulator- Glovebox coupling

The units can be connected to insulators via a connecting flange. Special designs are also possible.

 Versch. Control systems, SCADA visualisation

We offer a variety of different visualisation and documentation systems.

 EX-protection version ATEX,solvent discharge

If explosive gas mixtures are present, the systems can be equipped with explosion protection.

Continue to the Production facilities.