Water Resistance Test Chamber – Humidity Test

Salt Spray (Salt Fog) – ASTM B117 / ISO 9227 / JIS Z 2371 / ASTM G85 A1. This is the traditional technique to simulate corrosion in the laboratory, widely used to perform rapid corrosion tests on metal parts with organic or inorganic coatings. Its application mainly serves companies in the automotive, renewable energy, construction, plastics, aviation, oil and gas, paints, varnishes, electronics, chemical, metallurgical, and other industrial sectors.

The EQUILAM NA C.C.T Cyclic Corrosion Test chambers provide the best simulation for accelerated corrosion testing. Some studies indicate that the tests results closely resemble those obtained in outdoor exposure. Samples can be exposed to different environmental conditions. Contact Us: Email: secovina@vnn.vn  OR  Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816

The EQUILAM NA CORR AUTO model cyclic corrosion test chambers provide one of the most realistic simulations for accelerated corrosion testing. Some studies indicate that the test results closely resemble those obtained in outdoor exposure. Contact Us: Email: secovina@vnn.vn OR  Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816

The corrosion chambers type SO₂, KEQ series, also known as Kesternich chamber, were built to meet the requirements of ASTM, DIN, DIN EN ISO, others. Contact Us: Email: secovina@vnn.vn OR  Mr. Felipe Rojo, Email: frojo@equilamna.com

The Gravelometer, or Chipping Resistance Tester, is designed to rigorously meet the technical standards of ASTM D3170, SAE J400, ISO 20567-1, DIN 55996-1, and VDA. For other standards, please contact us. Contact Us: Email: secovina@vnn.vn OR  Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816 .

The accelerated weathering test simulates the atmosphere with sunlight (UV mode), dew (condensation mode), rain (thermal shock) and rain + UV (thermal shock and UV). The test results are reliable, fast and comply with the technical standards ASTM D4329, ASTM G154, ASTM G151, ASTM G53, SAE J2020, ISO 4892-3, among others. Contact Us: Email: secovina@vnn.vn OR  Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816 .

IPX9K Code Test Chamber Standards : ISO 20653, IEC 60529. Contact Us: Email: secovina@vnn.vn OR  Mr. Felipe Rojo, Email: frojo@equilamna.com , Phone: 1.754.900.7816

Dupont’s Impact Tester is used to measure the resistance of specimen (painted plate, hard plastic sheet, etc.) against impact force by observing the appearance of crack and peeling.
 

Solids Density Meter 

Application:rubber,plastic,cables,hard alloy,glass,new materials researching laboratory.
Standards:According to ASTM D792,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T208,GB/T5163,GB/T 1933 standards etc.
DH300 is one of the densimeter that have been widely applying to industry,using water as medium,the density value can be displayed after two steps.Compared with traditional densimeter,there is no calculation by hand,which is more convenient.
 

UESHIMA FT-1521 DEMATTIA FLEX CRACKING TESTER

The Constant Stress/Strain Flexometer measures the heating characteristics of a vulcanized rubber test piece when applied test amplitude the load(stress)controlling to a specified level applying to static load.It also performs tests by controlling a specified deflection(strain).Unlike conventional flexometers,this equipment adopts a special temperature detector to measure the inner temperature of a test piece during testing,thus making it possible to measure the real heat-up temperature.The test

CT Internal Mixer is suitable for many applications:

• Polymer and/or rubber compound.
• Polymer and/or rubber composite.
• Polymer and/or rubber blend.
• Food and food product i.e. starch modification.